S125 - WALL FAN 180 M³/H - 35dBA
Continuous or periodic exhaust ventilation for bathrooms, showers, kitchens, and other utility spaces.
Ventilation for rooms with high noise level limits.

Mounting on the ventilation shaft or duct connection.
Compatible with air ducts of 100, 125, and 150 mm.

Modern design and aesthetic appearance.

• The housing and impeller are made from high-quality, UV-resistant ABS plastic.
• Intelligent impeller design increases fan efficiency and lifespan.
• The fan and motor are specially designed for quiet operation.
• Mosquito net.
• Protection rating IP34.
• Reliable motor with minimal power consumption of 7 W (for 100 diameter).
• Designed for continuous operation and requires no maintenance.
• Equipped with overheating protection.

Manual:

The fan is controlled by an ambient light switch. Not included in the delivery package.
The fan is controlled by the built-in V pull cord switch. Not applicable for ceiling mounting.
Speed control is possible through a triac speed controller (see Electrical Accessories). Multiple fans can be connected to the same controller. Speed controllers cannot be connected to fans with T, TH, TP, VT, VTH modifications.

Automatic:

• Via the BU-1-60 electronic control unit (see Electrical Accessories). The control unit is provided separately.
• Via the T timer (the built-in run-out timer allows the fan to operate within 2-30 minutes after the fan is turned off).
• Via the humidity sensor and TH timer (if the room’s humidity level exceeds the sensor’s adjustable threshold value of 60-90%, the fan turns on automatically and operates until the humidity level drops to the standard level, after which the fan continues to run for a period based on the timer setting and then shuts off).

MOUNTING FEATURES

• The fan is mounted directly onto the ventilation shaft.
• A flexible duct is recommended if the ventilation shaft is located remotely.
• The air duct is connected to the fan’s exhaust flange with a clamp.
• Secured to the wall with self-tapping screws.
• Suitable for ceiling mounting.